[ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] sanitize start [ 0.000000] sanitize end [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 [ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2 [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000005fef0000 end: 000000005fff0000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000005fff0000 size: 0000000000003000 end: 000000005fff3000 type: 4 [ 0.000000] copy_e820_map() start: 000000005fff3000 size: 000000000000d000 end: 0000000060000000 type: 3 [ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2 [ 0.000000] copy_e820_map() start: 00000000ffb00000 size: 0000000000500000 end: 0000000100000000 type: 2 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000005fff0000 (usable) [ 0.000000] BIOS-e820: 000000005fff0000 - 000000005fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000005fff3000 - 0000000060000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] 639MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f5970 [ 0.000000] Entering add_active_range(0, 0, 393200) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 393200 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 393200 [ 0.000000] On node 0 totalpages: 393200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1279 pages used for memmap [ 0.000000] HighMem zone: 162545 pages, LIFO batch:31 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP (v000 IntelR ) @ 0x000f7820 [ 0.000000] ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000001) @ 0x5fff3000 [ 0.000000] ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000001) @ 0x5fff3040 [ 0.000000] ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000001) @ 0x5fff68c0 [ 0.000000] ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000d) @ 0x00000000 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:2 APIC version 20 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 70000000 (gap: 60000000:9ec00000) [ 0.000000] Detected 2532.981 MHz processor. [ 17.841068] Built 1 zonelists. Total pages: 390129 [ 17.841074] Kernel command line: root=UUID=1d73fd98-59a2-4e3f-b9be-501c281c35b9 ro quiet splash [ 17.841259] mapped APIC to ffffd000 (fee00000) [ 17.841262] mapped IOAPIC to ffffc000 (fec00000) [ 17.841266] Enabling fast FPU save and restore... done. [ 17.841270] Enabling unmasked SIMD FPU exception support... done. [ 17.841287] Initializing CPU#0 [ 17.841392] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 17.845788] Console: colour VGA+ 80x25 [ 17.846761] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 17.847741] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 17.923425] Memory: 1547972k/1572800k available (1992k kernel code, 23540k reserved, 893k data, 328k init, 655296k highmem) [ 17.923437] virtual kernel memory layout: [ 17.923438] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) [ 17.923439] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 17.923440] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 17.923441] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 17.923443] .init : 0xc03d7000 - 0xc0429000 ( 328 kB) [ 17.923444] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB) [ 17.923445] .text : 0xc0100000 - 0xc02f2264 (1992 kB) [ 17.923448] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 18.001295] Calibrating delay using timer specific routine.. 5070.08 BogoMIPS (lpj=10140166) [ 18.001354] Security Framework v1.0.0 initialized [ 18.001369] SELinux: Disabled at boot. [ 18.001391] Mount-cache hash table entries: 512 [ 18.001622] CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000 [ 18.001637] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 18.001640] CPU: L2 cache: 512K [ 18.001643] CPU: Hyper-Threading is disabled [ 18.001646] CPU: After all inits, caps: 3febfbff 00000000 00000000 00003080 00000000 00000000 00000000 [ 18.001661] Compat vDSO mapped to ffffe000. [ 18.001668] Remapping vsyscall page to ffffe000 [ 18.001685] Checking 'hlt' instruction... OK. [ 18.017470] SMP alternatives: switching to UP code [ 18.017820] Freeing SMP alternatives: 11k freed [ 18.018085] Early unpacking initramfs... done [ 18.344389] ACPI: Core revision 20060707 [ 18.349888] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT. [ 18.355753] CPU0: Intel(R) Pentium(R) 4 CPU 2.53GHz stepping 04 [ 18.355796] Total of 1 processors activated (5070.08 BogoMIPS). [ 18.355933] ENABLING IO-APIC IRQs [ 18.356127] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 18.501023] Brought up 1 CPUs [ 18.501314] Booting paravirtualized kernel on bare hardware [ 18.501398] Time: 10:10:44 Date: 04/02/107 [ 18.501435] NET: Registered protocol family 16 [ 18.501555] EISA bus registered [ 18.501561] ACPI: bus type pci registered [ 18.526288] PCI: PCI BIOS revision 2.10 entry at 0xfb870, last bus=2 [ 18.526290] PCI: Using configuration type 1 [ 18.526292] Setting up standard PCI resources [ 18.541219] ACPI: Interpreter enabled [ 18.541224] ACPI: Using IOAPIC for interrupt routing [ 18.541874] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 18.541881] PCI: Probing PCI hardware (bus 00) [ 18.542420] * The chipset may have PM-Timer Bug. Due to workarounds for a bug, [ 18.542422] * this clock source is slow. If you are sure your timer does not have [ 18.542423] * this bug, please use "acpi_pm_good" to disable the workaround [ 18.542469] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO [ 18.542473] PCI quirk: region 0480-04bf claimed by ICH4 GPIO [ 18.542722] Boot video device is 0000:01:00.0 [ 18.542886] PCI: Transparent bridge - 0000:00:1e.0 [ 18.542916] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 18.562840] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 18.563978] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 18.564242] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 18.564503] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 18.564766] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12 14 15) [ 18.565038] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 18.565297] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 18.565561] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 18.565829] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 18.567917] Linux Plug and Play Support v0.97 (c) Adam Belay [ 18.567931] pnp: PnP ACPI init [ 18.571230] pnp: PnP ACPI: found 13 devices [ 18.571238] PnPBIOS: Disabled by ACPI PNP [ 18.571307] PCI: Using ACPI for IRQ routing [ 18.571311] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 18.584973] NET: Registered protocol family 8 [ 18.584975] NET: Registered protocol family 20 [ 18.585390] pnp: 00:03: ioport range 0x400-0x4bf could not be reserved [ 18.585739] PCI: Bridge: 0000:00:01.0 [ 18.585741] IO window: disabled. [ 18.585746] MEM window: e4000000-e6ffffff [ 18.585750] PREFETCH window: d0000000-dfffffff [ 18.585754] PCI: Bridge: 0000:00:1e.0 [ 18.585757] IO window: c000-cfff [ 18.585763] MEM window: e7000000-e8ffffff [ 18.585767] PREFETCH window: 70000000-700fffff [ 18.585786] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 18.585819] NET: Registered protocol family 2 [ 18.625007] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 18.625269] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 18.626742] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 18.627693] TCP: Hash tables configured (established 131072 bind 65536) [ 18.627700] TCP reno registered [ 18.637108] checking if image is initramfs... it is [ 19.288276] Freeing initrd memory: 6751k freed [ 19.288864] audit: initializing netlink socket (disabled) [ 19.288882] audit(1178100645.532:1): initialized [ 19.288987] highmem bounce pool size: 64 pages [ 19.289061] VFS: Disk quotas dquot_6.5.1 [ 19.289089] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 19.289155] io scheduler noop registered [ 19.289159] io scheduler anticipatory registered [ 19.289162] io scheduler deadline registered [ 19.289171] io scheduler cfq registered (default) [ 19.289492] isapnp: Scanning for PnP cards... [ 19.643256] isapnp: No Plug & Play device found [ 19.671269] Real Time Clock Driver v1.12ac [ 19.671327] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 19.671449] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 19.672364] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 19.672665] mice: PS/2 mouse device common for all mice [ 19.673335] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 19.673638] input: Macintosh mouse button emulation as /class/input/input0 [ 19.673681] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 19.673686] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 19.674001] PNP: No PS/2 controller found. Probing ports directly. [ 19.676987] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 19.676996] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 19.677196] EISA: Probing bus 0 at eisa.0 [ 19.677233] EISA: Detected 0 cards. [ 19.707336] TCP cubic registered [ 19.707344] NET: Registered protocol family 1 [ 19.707373] Using IPI No-Shortcut mode [ 19.707447] ACPI: (supports S0 S1 S3 S4 S5) [ 19.707502] Magic number: 7:816:172 [ 19.708205] Time: tsc clocksource has been installed. [ 19.708210] Freeing unused kernel memory: 328k freed [ 21.005059] Capability LSM initialized [ 21.057331] ACPI: Processor [CPU0] (supports 2 throttling states) [ 21.703770] usbcore: registered new interface driver usbfs [ 21.703798] usbcore: registered new interface driver hub [ 21.703825] usbcore: registered new device driver usb [ 21.704962] USB Universal Host Controller Interface driver v3.0 [ 21.705030] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 21.705043] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 21.705048] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 21.705225] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 21.705254] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000d800 [ 21.705387] usb usb1: configuration #1 chosen from 1 choice [ 21.705415] hub 1-0:1.0: USB hub found [ 21.705426] hub 1-0:1.0: 2 ports detected [ 21.807115] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17 [ 21.807130] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 21.807135] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 21.807165] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 21.807194] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000d000 [ 21.807304] usb usb2: configuration #1 chosen from 1 choice [ 21.807338] hub 2-0:1.0: USB hub found [ 21.807348] hub 2-0:1.0: 2 ports detected [ 21.817706] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 21.911073] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 21.911088] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 21.911093] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 21.911127] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 21.911156] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400 [ 21.911266] usb usb3: configuration #1 chosen from 1 choice [ 21.911292] hub 3-0:1.0: USB hub found [ 21.911302] hub 3-0:1.0: 2 ports detected [ 21.914473] Floppy drive(s): fd0 is 1.44M [ 21.954535] FDC 0 is a post-1991 82077 [ 22.017255] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19 [ 22.017278] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 22.017283] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 22.017345] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 22.017394] PCI: cache line size of 128 is not supported by device 0000:00:1d.7 [ 22.017406] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xe9000000 [ 22.021298] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 22.021406] usb usb4: configuration #1 chosen from 1 choice [ 22.021438] hub 4-0:1.0: USB hub found [ 22.021450] hub 4-0:1.0: 6 ports detected [ 22.130110] SCSI subsystem initialized [ 22.136975] libata version 2.20 loaded. [ 22.141290] ata_piix 0000:00:1f.1: version 2.10ac1 [ 22.141311] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 22.141331] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 22.141401] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14 [ 22.141445] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15 [ 22.141466] scsi0 : ata_piix [ 22.312151] ata1.00: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968 [ 22.312156] ata1.00: ATA-6: WDC WD2000JB-00GVA0, 08.02D08, max UDMA/100 [ 22.312159] ata1.00: 390721968 sectors, multi 16: LBA48 [ 22.313099] ata1.01: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 [ 22.313102] ata1.01: ATA-5: WDC WD400EB-00CPF0, 06.04G06, max UDMA/100 [ 22.313105] ata1.01: 78165360 sectors, multi 16: LBA [ 22.324147] ata1.00: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968 [ 22.324152] ata1.00: configured for UDMA/100 [ 22.331717] ata1.01: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 [ 22.331720] ata1.01: configured for UDMA/100 [ 22.331733] scsi1 : ata_piix [ 22.906257] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 22.982417] ata2.00: ATAPI, max UDMA/33 [ 22.982422] ata2.01: ATAPI, max UDMA/33 [ 23.145185] usb 2-1: configuration #1 chosen from 1 choice [ 23.146341] ata2.00: configured for UDMA/33 [ 23.385953] usb 2-2: new low speed USB device using uhci_hcd and address 3 [ 23.563828] usb 2-2: configuration #1 chosen from 1 choice [ 23.568622] usbcore: registered new interface driver hiddev [ 23.582876] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input1 [ 23.582901] input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-1 [ 23.597864] input: CHICONY USB Keyboard as /class/input/input2 [ 23.597882] input: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:00:1d.1-2 [ 23.635748] input: CHICONY USB Keyboard as /class/input/input3 [ 23.635804] input,hiddev96: USB HID v1.10 Device [CHICONY USB Keyboard] on usb-0000:00:1d.1-2 [ 23.635823] usbcore: registered new interface driver usbhid [ 23.635827] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 53.127503] ata2.01: qc timeout (cmd 0xef) [ 53.127514] ata2.01: failed to set xfermode (err_mask=0x4) [ 53.127520] ata2: failed to recover some devices, retrying in 5 secs [ 58.948073] ata2.00: configured for UDMA/33 [ 88.929257] ata2.01: qc timeout (cmd 0xef) [ 88.929268] ata2.01: failed to set xfermode (err_mask=0x4) [ 88.929277] ata2.01: limiting speed to UDMA/33:PIO3 [ 88.929279] ata2: failed to recover some devices, retrying in 5 secs [ 94.749836] ata2.00: configured for UDMA/33 [ 124.731018] ata2.01: qc timeout (cmd 0xef) [ 124.731029] ata2.01: failed to set xfermode (err_mask=0x4) [ 124.731035] ata2.01: disabled [ 124.731039] ata2: failed to recover some devices, retrying in 5 secs [ 129.731919] ata2.00: failed to set xfermode (err_mask=0x40) [ 129.731926] ata2: failed to recover some devices, retrying in 5 secs [ 135.388614] ata2.00: configured for UDMA/33 [ 135.388808] scsi 0:0:0:0: Direct-Access ATA WDC WD2000JB-00G 08.0 PQ: 0 ANSI: 5 [ 135.389248] scsi 0:0:1:0: Direct-Access ATA WDC WD400EB-00CP 06.0 PQ: 0 ANSI: 5 [ 135.393043] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4163B A102 PQ: 0 ANSI: 5 [ 135.393556] 8139cp 0000:02:0c.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip [ 135.393559] 8139cp 0000:02:0c.0: Try the "8139too" driver instead. [ 135.396467] 8139too Fast Ethernet driver 0.9.28 [ 135.396523] ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 23 (level, low) -> IRQ 19 [ 135.396866] eth0: RealTek RTL8139 at 0xf8850000, 00:10:dc:6d:ab:a7, IRQ 19 [ 135.396869] eth0: Identified 8139 chip type 'RTL-8101' [ 135.417231] SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB) [ 135.417297] sda: Write Protect is off [ 135.417300] sda: Mode Sense: 00 3a 00 00 [ 135.417321] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 135.417394] SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB) [ 135.417405] sda: Write Protect is off [ 135.417408] sda: Mode Sense: 00 3a 00 00 [ 135.417426] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 135.417430] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 > [ 135.518694] sd 0:0:0:0: Attached scsi disk sda [ 135.518881] SCSI device sdb: 78165360 512-byte hdwr sectors (40021 MB) [ 135.518896] sdb: Write Protect is off [ 135.518898] sdb: Mode Sense: 00 3a 00 00 [ 135.518918] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 135.518974] SCSI device sdb: 78165360 512-byte hdwr sectors (40021 MB) [ 135.518985] sdb: Write Protect is off [ 135.518988] sdb: Mode Sense: 00 3a 00 00 [ 135.519006] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 135.519009] sdb: sdb1 [ 135.540235] sd 0:0:1:0: Attached scsi disk sdb [ 135.546092] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 135.546217] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 135.546354] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 135.554676] sr0: scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray [ 135.554685] Uniform CD-ROM driver Revision: 3.20 [ 135.554757] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 136.096688] Attempting manual resume [ 136.096693] swsusp: Resume From Partition 8:2 [ 136.096695] PM: Checking swsusp image. [ 136.096944] PM: Resume from disk failed. [ 136.127129] kjournald starting. Commit interval 5 seconds [ 136.127144] EXT3-fs: mounted filesystem with ordered data mode. [ 145.449911] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 [ 146.420409] NET: Registered protocol family 10 [ 146.420527] lo: Disabled Privacy Extensions [ 147.767140] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 147.776040] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 148.363384] Linux agpgart interface v0.102 (c) Dave Jones [ 148.392993] iTCO_vendor_support: vendor-support=0 [ 148.394316] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006) [ 148.394442] iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0460) [ 148.394486] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 148.410824] intel_rng: FWH not detected [ 148.707950] agpgart: Detected an Intel i845 Chipset. [ 148.711054] agpgart: AGP aperture is 64M @ 0xe0000000 [ 148.729203] input: PC Speaker as /class/input/input4 [ 148.783031] nvidia: module license 'NVIDIA' taints kernel. [ 149.150853] parport: PnPBIOS parport detected. [ 149.150948] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 149.167974] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 149.168347] NVRM: loading NVIDIA UNIX x86 Kernel Module 1.0-9755 Mon Feb 26 23:21:15 PST 2007 [ 149.435140] usbcore: registered new interface driver xpad [ 149.435146] drivers/usb/input/xpad.c: driver for Xbox controllers v0.1.6 [ 149.488615] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 20 [ 149.488650] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 149.803423] intel8x0_measure_ac97_clock: measured 55357 usecs [ 149.803427] intel8x0: clocking to 48000 [ 150.012043] lp0: using parport0 (interrupt-driven). [ 150.057214] fuse init (API version 7.8) [ 150.105441] Adding 2104504k swap on /dev/disk/by-uuid/04d1b0c7-14a4-400b-ae50-3b413df69b9d. Priority:-1 extents:1 across:2104504k [ 150.326215] EXT3 FS on sda3, internal journal [ 150.746143] kjournald starting. Commit interval 5 seconds [ 150.746529] EXT3 FS on sda5, internal journal [ 150.746534] EXT3-fs: mounted filesystem with ordered data mode. [ 150.761789] kjournald starting. Commit interval 5 seconds [ 150.762165] EXT3 FS on sda6, internal journal [ 150.762170] EXT3-fs: mounted filesystem with ordered data mode. [ 150.795005] NTFS driver 2.1.28 [Flags: R/O MODULE]. [ 150.845606] NTFS volume version 3.1. [ 150.867025] kjournald starting. Commit interval 5 seconds [ 150.867457] EXT3 FS on sda7, internal journal [ 150.867463] EXT3-fs: mounted filesystem with ordered data mode. [ 151.001593] NTFS volume version 3.1. [ 151.028788] kjournald starting. Commit interval 5 seconds [ 151.029163] EXT3 FS on sda8, internal journal [ 151.029168] EXT3-fs: mounted filesystem with ordered data mode. [ 153.396932] input: Power Button (FF) as /class/input/input5 [ 153.402618] ACPI: Power Button (FF) [PWRF] [ 153.442185] input: Power Button (CM) as /class/input/input6 [ 153.453716] ACPI: Power Button (CM) [PWRB] [ 153.475172] Using specific hotkey driver [ 153.514772] No dock devices found. [ 153.567267] ibm_acpi: ec object not found [ 153.714173] pcc_acpi: loading... [ 156.954987] eth0: no IPv6 routers present [ 160.123551] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [ 160.123975] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode [ 160.124218] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [ 160.340061] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 160.340067] apm: overridden by ACPI. [ 162.400475] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 162.517545] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 162.518079] NFSD: starting 90-second grace period [ 168.398181] Bluetooth: Core ver 2.11 [ 168.398252] NET: Registered protocol family 31 [ 168.398255] Bluetooth: HCI device and connection manager initialized [ 168.398259] Bluetooth: HCI socket layer initialized [ 168.457100] Bluetooth: L2CAP ver 2.8 [ 168.457105] Bluetooth: L2CAP socket layer initialized [ 168.543024] Bluetooth: RFCOMM socket layer initialized [ 168.543041] Bluetooth: RFCOMM TTY layer initialized [ 168.543043] Bluetooth: RFCOMM ver 1.8 [ 256.670628] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 256.826395] ISOFS: changing to secondary root